Naroote 702 Generator Controller, 702 MS-HC Generator Controller, Manual Start Board Panel with Keys

Descriptions: The 702 MS-HC is available in manual start versions, offering an excellent range of engine monitoring and features.The module has been designed to monitor low oil pressure, high engine temperature, over speeds and a user defined auxiliary input. The DSE701 module includes a remote start input. This input allows the module to be started from a pre-defined remote location. Specifications: Model: 702 MS-HC Size: 8.5 x 7 x 3.8cm/3.45 x 2.76 x 1.50inch Weight:157g : Hours counter provides accurate information for monitoring maintenance and periods Multiple engine parameters are monitored simultaneously. Manual Mode Operation: 1.The module is started using the on-board key/buttons 2.The user turns the key to the palms position 3. The engine pre-heat button is then pressed for the required time 4. The start button is then pressed to start the engine 5. To stop the engine the key needs to be turned to the off position Overspeed : The engine over speeds trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal (57Hz or 68Hz trip respectively). During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeeds is enabled) to allow the engine to reach its optimums running speeds. Package Included: 1 x 702 MS-HC Generator Controller 2 x keys 2 x screws

• ♣ The generator controller is started and stopped manually
• ♣ It also has the capability to monitor battery charging by utilizing the WL terminal on the alternator. When the module detects a fault condition it automatically shuts down the engine
• ♣ This generator controller is microcomputer control
• ♣ With the function of LED indicating fault information. With LCD running accumulative time. With cooler water temperature . With engine overspeed
• ♣ With lubricating oil low pressure , the module has been designed to monitor low oil pressure